2024-T3 Aluminum coil

The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.

Category：

Aluminum Coil

Key Words：

Aluminum Coil

+8613455162832

admin@sdbaopumetal.com

E-mail

Related Products

Message

2024-T3 Aluminum coil

About the aluminum

The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment. 2024 is a typical duralumin alloy in the aluminum-copper-magnesium system. It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance. Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts. 2024 aluminum alloy is a kind of high strength duralumin, which can be strengthened by heat treatment. It has medium plasticity under quenching and quenching state, good spot welding and gas welding, and has a tendency to form intercrystalline cracks. The alloy has good machinability after quenching and cold work hardening, and low machinability after annealing. Corrosion resistance is not high, often using anodic oxidation treatment and paint method or surface coated aluminum layer to improve its corrosion resistance. It is mainly used for making various high-load parts and components (but not including stamping parts and forgings), such as skeleton parts, skin, frame, wing ribs, wing beams, rivets and other working parts below 150℃.
Chemical composition: Silicon Si: 0.50; Cu: 3.8-4.9; Mn: 0.30-1.0; Magnesium Mg: 1.2-1.8; Chromium Cr: 0.10; Zinc Zn: 0.25; Aluminum Al: allowance;
2024 aluminum alloy, the main alloying elements are copper and magnesium. Applications where high strength but low weight ratio is required, and good fatigue strength. Not weldable, general processing performance. Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
2025-T3 aluminum alloy has ultimate tensile strength of 58,000-62,000 psi (400-427 MPa) and yield strength of 39,000-40,000 psi (269-276 MPa). Elongation 10-15%.

Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used. Aluminum has good reflection performance of light, reflecting ultraviolet light is stronger than silver, the purer aluminum is, its reflection ability is better, and the method of vacuum aluminum plating is commonly used to make high-quality mirrors. Vacuum aluminized film combined with polysilicon film becomes a cheap and lightweight solar cell material. Aluminum powder can maintain a silvery luster, often used to make paint, commonly known as silver powder. Pure aluminum conducts electricity very well, second only to silver and copper. In the electric power industry, it can replace part of copper for wires and cables. Aluminum is a good conductor of heat. It can be used to make various heat exchangers, heat dissipating materials and civil cookers in industry. Aluminum has good ductility, can be drawn into a fine wire, rolled into a variety of aluminum products, but also can be made into thinner than 0.01mm aluminum foil, widely used in packaging cigarettes, candy, etc.. Aluminum alloy has some better properties than pure aluminum, which greatly expands the application range of aluminum. For example, pure aluminum is soft, when a certain amount of copper, magnesium, manganese and other metals are added to aluminum, the strength can be greatly improved, almost equivalent to steel, and the density is small, not easy to rust, widely used in aircraft, cars, trains, ships, artificial satellites, rockets manufacturing. At -196 ° C, some steel is as brittle as glass, while some aluminum alloys increase in strength and toughness, making them cheap and lightweight cryogenic materials that can be used to store liquid oxygen and hydrogen for rocket fuel.

PRODUCT

Thickness	0.1-400mm，etc	Length:	100-12000mm，or as required
Width	20-3000mm，etc	Standard:	ASTM，AISI，JIS，GB， DIN，EN
Certification:	ISO, SGS，BV
Surface finish	mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc
Grade	1000 Series: 1050 1060 1070 1100 1200 1235 etc.
	3000 Series: 3003 3004 3005 3104 3105 3A21 etc.
	5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc.
	6000 Series: 6061 6063 6082 6A02 etc.
	7000 Series: 7050 7475 7075 etc.
Temper	H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321.
Payment Terms	T/T, L/C at sight,West Union	Loading port	any port in China
Packing	standard export packing (inside:water proof paper,outside:steel covered with strips and pallets)
Container size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
	40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
	40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)

PACKING AND SHIPPING

The company has main production lines such as pickling, cold rolling, hot-dip galvanizing, hot-dip galvanizing, thick plate galvanizing, and color coating, forming an annual output of 1 million tons of pickling coils, 1 million tons of cold-rolled steel sheets, and 900,000 tons of hot-dip steel sheets. The scale of galvanized and hot-dip aluminum-zinc-silicon steel sheets, 450,000 tons of thick galvanized steel sheets, and 300,000 tons of color-coated steel sheets. It is one of the largest suppliers of steel and non-ferrous metal smelting and processing in Shandong Province.

FACTORY

Shandong Baopu Metal Products Co., Ltd. was established in March 2010. It is a comprehensive large-scale enterprise integrating coating products and various steel processing and production, warehousing, distribution, and foreign trade sales.

CUSTOMER VISIT

Aluminum Coil